you are not sure about the quality of your artwork, do not worry. Please go ahead
and upload it at the time of ordering. We check every artwork file for quality
in order to ensure adequate final results and we will let you know if there is
a problem with your artwork. As a general rule, please use the best quality
artwork that is available to you.
For best results and to minimize any delays with your order, please follow the
artwork submission guidelines below:
is best to submit your artwork in EPS (when
using Vector graphics), or TIFF (when
using bitmap graphics) formats. JPEG, GIF, PNG, AI, PDF,
other formats are also acceptable.
For bitmap artwork types (JPEG, TIFF, GIF, PNG, etc.) please use 600dpi (Dots
Per Inch) resolution
at actual product size, if available. Example: if the product you are ordering
is a 1"x1" label or badge, the artwork should be at 1"x1" at
600dpi resolution, in pixels that's 600x600. 300dpi and lower can also work,
however best results are achieved using up-to 600dpi images. Higher than 600dpi
is not recommended but is acceptable.
When submitting JPEG, GIF, PNG, PDF, or any other image types that support compression,
or color palette selection, please use the least compression level, widest color
palette, or highest quality setting offered by your imaging software when saving.
This will help preserve the state of the image closer to its original form and
will generally produce the best final results.
When submitting artwork in vector graphics (EPS, AI, etc.) format, all fonts
should be converted to paths (please refer to your software documentation).
Colors for all types of artwork are recommended in CMYK model for best color-match,
but RGB model is also acceptable (please refer to your software documentation).
using artwork or image that requires full
bleed, please leave at least 1/8" as a safe area to allow for trimming
and to protect important parts of the artwork from being excluded from the image
or from being too close to the edge.
THIS WINDOW | CASE-BADGES.COM